[WpProQuiz 343]
Search results for: “”
-
[op-ed snap] Why ‘Make in India’ has failed
Context
Five years after its launch its appropriate time to take the stock of the progress made by ‘Make in India’.
Three major objectives of the initiative
- First- Manufacturing growth rate at 12-14 %: The first objective is to increase the manufacturing sector’s growth rate to 12-14% per annum in order to increase the sector’s share in the economy.
- Second-100 million jobs: The second objective is to create 100 million additional manufacturing jobs in the economy by 2022.
- Third-increase manufacturing’s contribution to GDP to 25%: The third objective is to ensure that the manufacturing sector’s contribution to GDP is increased to 25% by 2022 (revised to 2025) from the current 16%.
Assessment of the progress made so far
- As the policy changes were intended to usher growth in three key variables of the manufacturing sector — investments, output, and employment growth.
- Progress on the investment front:
- Slow growth: The last five years witnessed slow growth of investment in the economy.
- This is more so when we consider capital investments in the manufacturing sector.
- The decline in gross fixed capital formation: Gross fixed capital formation of the private sector declined to 28.6% of GDP in 2017-18 from 31.3% in 2013-14 (Economic Survey 2018-19).
- Gross Fixed Capital Formation is the measure of aggregate investment.
- Increase in private sector’s savings decrease in investment: Household savings have declined, while the private corporate sector’s savings have increased.
- This is a scenario where the private sector’s savings have increased, but investments have decreased, despite policy measures to provide a good investment climate.
- Progress on the output growth front:
- Double-digit growth only in two quarters: The monthly index of industrial production (IIP) pertaining to manufacturing has registered double-digit growth rates only on two occasions during the period April 2012 to November 2019.
- Below 3% for the most part: The data show that for a majority of the months, it was 3% or below and even negative for some months.
- The negative growth implies a contraction of the sector.
- Progress on the employment growth front:
- No progress: The employment, especially industrial employment, has not grown to keep pace with the rate of new entries into the labour market.
Problems with the policy
- The initiative had two major lacunae.
- First- Too much reliance on foreign capital: The bulk of these schemes relied too much on foreign capital for investments and global markets for produce.
- This created an inbuilt uncertainty, as domestic production had to be planned according to the demand and supply conditions elsewhere.
- Second-Lack of implementation: The policy implementers need to take into account the implications of implementation deficit in their decisions.
- The result of such a policy oversight is evident in a large number of stalled projects in India.
- The spate of policy announcements without having the preparedness to implement them is ‘policy casualness’.
- ‘Make in India’ has been plagued by a large number of under-prepared initiatives.
Three reasons why ‘Make in India’ failed to perform
- Too-much ambitious goals: It set out too ambitious growth rates for the manufacturing sector to achieve.
- Beyond capacity rate for the sector: An annual growth rate of 12-14% is well beyond the capacity of the industrial sector.
- Overestimation of implementation capacity: To expect to build capabilities for such a quantum jump is perhaps an enormous overestimation of the implementation capacity of the government.
- Dealing with too many sectors: The initiative brought in too many sectors into its fold.
- Lack of policy focus: Bringing in too many sectors under its fold led to a loss of policy focus.
- Lack of understanding of comparative advantages: Further, it was seen as a policy devoid of any understanding of the comparative advantages of the domestic economy.
- Ill-timed launch
- Given the uncertainties of the global economy and ever-rising trade protectionism, the initiative was spectacularly ill-timed.
Conclusion
- In order to revive the ‘Make in India’ there is a need to make necessary changes in the policy and root out the causes associated with the policy implementation.
-
India-Pakistan Trade

Tensions between India and Pakistan in 2019 have reduced the already low volumes of trade between the two countries to near zero.
India-Pakistan trade, in the beginning
- In 1948-49, about 56% of Pakistan’s exports were to India, and 32% of its imports came from India.
- From 1948-65, India and Pakistan used a number of land routes for bilateral trade; there were eight customs stations in Pakistan’s Punjab province and three customs checkpoints in Sindh.
- India remained Pakistan’s largest trading partner until 1955-56. Between 1947 and 1965, the countries signed 14 bilateral agreements on trade, covering avoidance of double taxation, air services, and banking, etc.
- In 1965, nine branches of six Indian banks were operating in Pakistan.
Close to vanishing

- Following the terrorist attack on the CRPF convoy in Pulwama in February, India withdrew Most Favoured Nation (MFN) status for Pakistan and raised customs duty on Pakistani imports to 200% .
- In April, India suspended cross-LoC trade to stop the misuse of this route by Pakistan-based elements.
- Pakistan on its part closed its airspace to India for a prolonged period.
- The decisions by both countries, while targeted at hurting the neighbour, have severely impacted the livelihoods of individuals and families involved in cross-border trading activities.
-
Pulse Polio Programme
The beginning of this year’s Pulse Polio Programme was inaugurated from the Rashtrapati Bhavan itself. To prevent the virus from coming to India, the government has since March 2014 made the Oral Polio Vaccination (OPV) mandatory for those travelling between India and polio-affected countries.
The Pulse Polio Programme
- India launched the Pulse Polio immunisation programme in 1995, after a resolution for a global initiative of polio eradication was adopted by the World Health Assembly (WHA) in 1988.
- Children in the age group of 0-5 years are administered polio drops during national and sub-national immunisation rounds (in high-risk areas) every year.
India is polio-free
- According to the Ministry of Health, the last polio case in the country was reported from Howrah district of West Bengal in January 2011.
- The WHO on February 24, 2012, removed India from the list of countries with active endemic wild polio virus transmission.
- Two years later, the South-East Asia Region of the WHO, of which India is a part, was certified as polio-free.
Back2Basics
What is Polio?
- The WHO defines polio or poliomyelitis as a highly infectious viral disease, which mainly affects young children.
- The virus is transmitted by person-to-person, spread mainly through the faecal-oral route or, less frequently, by a common vehicle (e.g. contaminated water or food) and multiplies in the intestine, from where it can invade the nervous system and can cause paralysis.
- Initial symptoms of polio include fever, fatigue, headache, vomiting, stiffness in the neck, and pain in the limbs. In a small proportion of cases, the disease causes paralysis, which is often permanent.
- There is no cure for polio, it can only be prevented by immunization.
-
Natural Gas Grid (NGG)
A study to facilitate the development of a National Gas Grid is to be undertaken soon by a U.S. entity. The Government has last year envisaged developing the NGG.
National Gas Grid
- At present about 16,788 Km natural gas pipeline is operational and about 14,239 Km gas pipelines are being developed to increase the availability of natural gas across the country.
- These pipelines have been authorized by Petroleum and Natural Gas Regulatory Board (PNGRB) and are at various stages of execution viz. Pre-Project activities/laying/testing/commissioning etc.
Aims and Objective
- To remove regional imbalance within the country with regard to access of natural gas and provide clean and green fuel throughout the country.
- To connect gas sources to major demand centres and ensure availability of gas to consumers in various sectors.
- Development of City Gas Distribution Networks in various cities for supply of CNG and PNG.
NGG Technical Assistance Program
- The India NGG Technical Assistance programme stems from an agreement in September between PNGRB and the US Trade Development Agency (USTDA).
- The study will aim at developing an economic basis for building India’s Natural Gas Grid (NGG).
Utility of the study
- It would provide an update on the gas demand analysis, including anchor consumers, industries, city gas distribution (CGD) and emerging demand centres such as CNG and LNG for road transport.
- The study will take a fresh look at the gas supply analysis too. This includes review of LNG imports, domestic supply, potential transnational gas pipeline imports and virtual pipelines.
- Share of natural gas in India’s energy basket is 6.2% as against 23.4% globally and is expected to increase.
-
IVF of White Rhinos
Researchers had created another embryo — the third — of the nearly extinct northern white rhino. This is seen as a remarkable success in an ongoing global mission to keep the species from going extinct.
What is IVF?
- IVF is a type of assisted reproductive technology used for infertility treatment and gestational surrogacy.
- A fertilised egg may be implanted into a surrogate’s uterus, and the resulting child is genetically unrelated to the surrogate.
- Some countries have banned or otherwise regulate the availability of IVF treatment, giving rise to fertility tourism.
- Restrictions on the availability of IVF include costs and age, in order for a woman to carry a healthy pregnancy to term.
- IVF is generally not used until less invasive or expensive options have failed or been determined unlikely to work.
IVF process
- In vitro fertilisation (IVF) is a process of fertilization where an egg is combined with sperm outside the body, in vitro (“in glass”).
- The process involves monitoring and stimulating a female ovulatory process, removing an ovum or ova (egg or eggs) from the female ovaries and letting sperm fertilise them in a liquid in a laboratory.
- After the fertilised egg (zygote) undergoes embryo culture for 2–6 days, it is implanted in the same or another female uterus, with the intention of establishing a successful pregnancy.
Types of Rhinos
- The northern white is one of the two subspecies of the white (or square-lipped) rhinoceros, which once roamed several African countries south of the Sahara.
- The other subspecies, the southern white is, by contrast, the most numerous subspecies of rhino, and is found primarily in South Africa.
- There is also the black (or hook-lipped) rhinoceros in Africa, which too, is fighting for survival, and at least three of whose subspecies are already extinct.
- The Indian rhinoceros is different from its African cousins, most prominently in that it has only one horn.
- There is also a Javan rhino, which too, has one horn, and a Sumatran rhino which, like the African rhinos, has two horns.
-
Drone Census
India’s first drone census has seen only 2,500 Ownership Acknowledgment Numbers (OANs) being issued by the Ministry of Civil Aviation (MoCA) since five days of beginning.
Drone Census
- The MoCA had issued a notice providing a one-time opportunity for voluntary disclosure of all drones and operators starting from January 14.
- The DGCA issued the Civil Aviation Requirements (CAR), Section 3 – Air Transport Series X, Part I, Issue I, dated August 27, 2018 regulates use of drones.
- It provides the process for obtaining Unique Identification Number, Unmanned Aircraft Operator Permit (UAOP) and other operational requirements; there are drones that do not comply with the CAR.
- If a drone is not enlisted by 5 p.m. on January 31, then it will most definitely be confiscated.
- After January 31, only authorised retailers will be allowed to sell them after uploading buyers’ Know your Customer (KYC) and sale invoice, similar to the sale of mobile phones and cars.
Why such move?
- The exercise will give the government a picture of who owns what kind of drone in which part of the country.
- It will help in making policy decisions that should ideally become the base for understanding the scale of operations.
-
Irrawaddy Dolphins

146 Irrawaddy dolphins were recently sighted in Chilika Lake of Odisha. The lake has highest single lagoon population of the aquatic mammal in the world.
Irrawaddy Dolphins
- IUCN Status: Endangered
- Scientific Name: Orcaella brevirostris
- Habitats: Lakes, Rivers, Estuaries, and Coasts

- The Irrawaddy dolphin is a euryhaline species of oceanic dolphin found in discontinuous subpopulations near sea coasts and in estuaries and rivers in parts of the Bay of Bengal and Southeast Asia.
- They are also found in coastal areas in South and Southeast Asia, and in three rivers: the Ayeyarwady (Myanmar), the Mahakam (Indonesian Borneo) and the Mekong.
- The total population of these aquatic mammals in the world is estimated to be less than 7,500.
- Of these, more than 6,000 Irrawaddy dolphins have been reported from Bangladesh, while the dolphin distribution in Chilika is considered to be the highest single lagoon population.
-
K-4 Missile
India successfully test-fired the 3,500-km range submarine-launched ballistic missile, K-4. The test was carried out by the DRDO from a submerged pontoon off the Visakhapatnam coast around noon.
K-4
- K-4 is a nuclear-capable Intermediate-range submarine-launched ballistic missile developed and tested successfully in the month of January 2020 by DRDO.
- The missile has a maximum range of about 3500 km.
- Once inducted, these missiles will be the mainstay of the Arihant class of indigenous ballistic missile nuclear submarines (SSBN).
- It will give India the standoff capability to launch nuclear weapons submerged in Indian waters.
What’s so special about K-4?
: Circular Error Probability
- India’s Circular Error Probability (CEP) is much more sophisticated than Chinese missiles.
- The CEP determines the accuracy of a missile.
- The lower the CEP, the more accurate the missile is.
- There are very few countries which have managed to achieve this technological breakthrough.
About INS Arihant
- The Advanced Technology Project (ATV) began in the 1980s and the first of them, Arihant, was launched in 2009.
- INS Arihant, the first and only operational SSBN is armed with K-15 Sagarika missiles with a range of 750 km.
- Given India’s position of ‘No-First-Use’ (NFU) in launching nuclear weapons, the SSBN is the most dependable platform for a second-strike.
- Because they are powered by nuclear reactors, these submarines can stay underwater indefinitely without the adversary detecting it.
- The other two platforms — land based and air launched are far easier to detect.